nock a sleek , retro - calculate desk using computer hardware store materials and these easy DIY instructions .
Create a display blank that ’s completely customized to your collection of best-loved accents . Dabito craft this paries unit , complete with a built - in desk area , for just $ 230 . nerve - colored spray rouge spiffs up the metal brackets . For shelves , or else of staining plyboard , he used speck board by Rubbermaid .
What You’ll Need
Equipment / Tools
Materials
Instructions
Paint the Tracks
Spray - paint the tracks and wall bracket out of doors or in a ventilate workspace . Apply a bed of flat coat first , then two stratum of gilded paint . lease dry .
Mark and Measure
Mark hole for the tracks . Place the runway vertically 21 column inch off the floor . Use a level to ensure the raceway is straight . Mark the seven holes with a pencil .
Move on to the next track . Use a mag tape measure to mensurate 22 inches from those marks . Place the second running vertically , 21 inches off the floor , with a stage to mark yap . Repeat this whole tone two more times .
Install the Tracks
Use a 1/4 - inch exercise bit to exercise the set spot on the wall . mildly hammer anchor into the wall . Line up each track over linchpin , then sleep with it in .
Secure the Shelves
Pop the shelf brackets into the track to your desired configuration . range the wooden shelves on the bracket . For standard desk height , measure 29 column inch from the floor . There are countless ways to configure the shelves , so it ’s really up to you if you want to admit a desk or just make shelves .
Use screws to secure the brackets to each ledge . Dabito first used an 1/8 - column inch drill bit to create a golf hole for the screw . you’re able to also spot - treat the screws by dabbing on some gold paint with a brush .
